Home » Products » Hydraulic Slurry Pump » Hydraulic Slurry Pump Mini Type HSP65

loading

Hydraulic Slurry Pump Mini Type HSP65

Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
  • HSP65

  • Selam

The structure of 2.5 Inch Hydraulic Slurry Pump


1. Pump body of 2.5 Inch Hydraulic Slurry Pump


The pump body is one of the main components of the hydraulic slurry pump, which is the shell of the entire device. The structure of the pump body must be firm, and the pressure must not be greater than the larger value that the pump can bear. The material of the pump body is generally used for cast iron, steel plates, stainless steel, etc.


2. Rotary of 2.5Inch Hydraulic Slurry Pump


The rotor is a rotating part in the pump body, which is usually composed of impeller and axis. It is the core part of the hydraulic slurry pump, which is transported by the liquid in the driver's pump. The leaf wheels can be designed as different shapes according to the requirements of the pump to meet different conveying requirements.


3. Bottom of 2.5 Inch Hydraulic Slurry Pump


The head is part of the hydraulic slurry pump. It is used for the gap between the sealing pump body and the rotor to ensure that the liquid in the pump body will not leak out. The head is usually divided into two parts: front sealed head and rear sealed head. Their materials are generally used for wear -resistant and high temperature -resistant materials.


4. rotor bearing of 2.5 Inch Hydraulic Slurry Pump


The rotor bearing in the hydraulic slurry pump is a supporting rotor component that supports the weight of the rotor and the rotor of the rotor through the bearings. The material of the bearing generally chooses high -intensity alloy steel or stainless steel. At the same time, bearings usually need to be lubricated to ensure that it can work stable.


5. Residation tube of 2.5 Inch Hydraulic Slurry Pump


The residue tube is another part of the hydraulic slurry pump, which is mainly used to discharge impurities and solid particles in the conveying material. Because these impurities often cause damage to the pump parts in the pump body, the design of the residue tube is also very important.


6. Pump station of 2.5 Inch Hydraulic Slurry Pump


The hydraulic slurry pump needs to be installed and maintained in the pump station. Pumping station is a equipment that integrates transmission pumps, electrical control, and hydraulic control equivalent, including a variety of pipelines, valves, pressure gates, etc. The design of the pump station requires comprehensive consideration of factors such as the work environment and requirements of the equipment.


The application field of 2.5 Inch Hydraulic Slurry Pump


Hydraulic slurry pumps are widely used in municipal renovation and drainage, urban flood prevention and drainage, sewage pipes to clean up and drainage and drainage of construction sites.

1. The hydraulic slurry pump is directly driven by the hydraulic power station without the risk of leakage

2. Have a longer service life, strong reliability, and can extract large solid particles

3. Lightweight design as a whole, strong mobility, high work efficiency



CNSELAM — 
YOUR PROFESSIONAL HYDRAULIC SUBMERSIBLE PUMP SUPPLIER
WhatsApp: +8618355335420

Quick Links

Product Category

Send Us A Message
 Copyrights 2023 Anhui Selam Heavy Industry Technology Co., Ltd. All rights reserved. Sitemap | Privacy Policy | Support By Leadong